Electric underfloor heating Tile heating Thin-bed heating

High-quality electric underfloor heating with at least 150 watts /m². The underfloor heating is connected to 230 volts. The electric underfloor heating systems are approved for new and old buildings.

They can also be used as tile heaters. Approved for wet rooms. Our underfloor heating systems are low in electrosmog and VDE approved. The bending radius of our underfloor heating systems is at least 25 mm.
The protective measure of the electric underfloor heating must be protected with a 30 mA residual current circuit breaker. The nominal limit temperature is 90 degrees Celsius. 10-year manufacturer's guarantee.

Analogue thermostat: Flush-mounted underfloor heating controller standard, setting range 10...40 degrees Celsius. With "On/Off" switch and "Heating on" LED, 230 V, 10 (4) A. Colour pure white (similar to RAL 9010), including sensor (2 kOhm) with 4.00 m cable.

Digital Plus thermostat: Flush-mounted comfort underfloor heating controller, setting range 10...40 degrees Celsius. With digital timer for night setback, 230 V, 10 (4) A. Colour pure white (similar to RAL 9010), including sensor (2 kOhm) with 4.00 m cable. Illuminated display