Saxoboard adhesive foam for insulation boards
Product number:
SAX10529
Customer-specific customization
Description
Building materials
- EPS insulation boards
- concrete
- Bitumen coating
- anodising
- plasterboard
- wood
- Cold bitumen membranes
- Plastics (not on PE, PP, Teflon, silicone)
- masonry
- Metals with primer coat
- plaster
The details (building materials, loads, etc.) of any available approval apply.
Functionality
- Foam gun is required
- 1K PU foam
- Yield sufficient for up to 12 m² wall/floor area
- Ambient processing temperature: +5 °C to +25 °C (can temperature: +10 °C to +25 °C)
- Open time approx. 10 min
- Can be cut after approx. 20 min
- Temperature resistant from -40 °C to +90 °C
- Very good thermal insulation properties
- Shear strength (EN 12090) 38.7 kPa
- Fresh foam splashes can be removed immediately with fischer PU Reinger.
- When pressed on, an adhesive surface area of at least 40% must be achieved.
- Do not knock the insulation boards against the wall (damages the foam structure).
Scope of Delivery
- ordered quantity of adhesive foam
