Screed shower channel
Description
High-quality stainless steel shower channel for installation in and on screed. The screed channels have an optional hard foam base that is firmly bonded to the lower part of the channel. The hard foam base is 8.5 cm high under the channel.
With a horizontal drain, the shower channel has an overall installation height of 8.5 cm. You can use screed, adhesive or other hard foam to build the hard foam lower body to any height. The hard foam lower body can also be shortened.
With a vertical drain without a lower body, the installation height is only 3 cm. If required, a lower body can also be selected here and shortened to the required height.
The grate width of the shower channel is 7 cm.
The lower tray body of the channel provides you with a second drainage level. This shower channel comes with a siphon (rotatable through 360 degrees) with an odour trap for removal and cleaning, as well as a hair strainer. The drains are German branded products and impress with their easy cleaning, high drainage capacity and long service life.
The horizontal drain has a drainage capacity of 0.70 l/s. The vertical drain has a drainage capacity of 1.1 l/s.
As anew addition to our shower channels, you cannow also order a high-quality slope wedge made of XPS rigid foam. This is coated on both sides with a special waterproof coating and has an integrated slope on one side. The thickness of the slope board is 22 mm at the thickest point and decreases to 11 mm in the channel area. Thanks to its flat and very stable design, our slope board is suitable for almost all installation situations. The slope wedge can be cut to size with a cutter knife or jigsaw without losing the guarantee.
Scope of Delivery
- Shower channel of your choice with top section
- Siphon horizontal or vertical with odor trap
- High-quality sealing sleeve
Installation Depth
For horizontal outlet: 8,5 cm
For vertical outlet: 3 cm
Available downloads
