Sealing membrane / sealing fleece

Waterproofing membrane for wall waterproofing in wet areas.

Areas of application

• for wall and floor waterproofing in wet areas
• Can be used on all absorbent and non-absorbent substrates
• this gives you the layer thickness of 1 mm required by DIN and ZDB data sheet immediately after bonding the sealing membrane
• impermeable to water, crack-bridging, resistant to acids and alkalis
• Tested by the Braunschweig Materials Testing Institute

Application instructions:

1. Substrate must be dust-free and dry (prime beforehand if necessary)
2. Apply normal tile adhesive to the walls using a notched trowel approx. 4-6 mm thick.
3. Fix the sealing membrane to the wall like a "wallpaper" and smooth it out with the smooth side of the notched trowel or a spatula.
4. Now you don't need to wait for it to dry, you can start tiling immediately.
5. If you have a larger shower area and want to use two sealing sheets next to each other, please do not apply the sealing sheet "butt to butt", but with a 5 cm overlap.

Price per running metre (waterproofing membrane is 100 cm wide). The sealing membrane is cut to size and therefore cannot be exchanged or returned.