• Thermostatic faucet with 38° safety lock
• Practical and modern glass shelf
• Diverter between hand and overhead shower
• Hand and overhead shower with flexible rubber nubs
• Pivoting, square overhead shower
• Hand shower can be hung on the glass shelf

• 6 or 9 tub feet
• Can be used for all shower trays
• Adjustment range 90-120 mm
• 200 kg load capacity

Approx. 10 m² of glass surface of a shower can be treated with this water-repellent glass sealing set. The lotus effect of the nano glass sealant prevents the adhesion of small dirt and limescale particles, allowing water to bead up and roll off the surface. Included in the set: Pre-cleaner 100ml, glass sealant 100ml, cleaning sponge, microfibre and polishing cloth. The glass sealant for showers can be renewed at any time if necessary. Tip: You can also seal ceramic surfaces, e.g. tiles, washbasins or bathtubs and shower trays with this nano sealant.

Straight wall bracket set for 6/8mm shower, chrome-plated, L=120cm, G/SUL120-cr

A shower fixed wall made of 6/8mm toughened safety glass can be stabilised and connected to the opposite wall at the top with this straight, 120cm long and shortenable fixing arm. Installation is possible in addition to the towel rail. A chrome-plated blind cap is also included in the scope of delivery for optional sealing of a glass hole. Delivery includes all screws, Fischer UX plugs and installation instructions in four languages (D, GB, I, FR).

The adjustment range of a shower enclosure can be increased by 1 cm with this chrome-coloured aluminium widening profile. The widening profile is mounted on the left and/or right between the wall and the wall fitting (fixing or hinge) of the shower (for special heights of 173 cm, it must be shortened on site). Supplied with all screws, Fischer UX plugs and installation instructions in four languages (D, GB, I, FR). Note: Not suitable for widening door stop mouldings; the AVP widening profile for recess doors must be used for this purpose (see: Shower accessories).

The adjustment range of a shower enclosure can be increased by 2 cm with this chrome-coloured aluminium widening profile. The widening profile is mounted on the left and/or right between the wall and the wall fitting (fixing or hinge) of the shower (for special heights of 173 cm, it must be shortened on site). Supplied with all screws, Fischer UX plugs and installation instructions in four languages (D, GB, I, FR). Note: Not suitable for widening door stop mouldings; the AVP widening profile for recess doors must be used for this purpose (see: Shower accessories).

• Mounting panel for securing fittings, shower heads, and pipes as an accessory for Saxoboard round showers/snail showers
• With built-in reinforcement plate
• Curvature radius adapted to the respective shower
• Directly tiled
• Height 210 cm - Width 34.5 cm - Thickness 3.2 cm

A fixed shower wall can be stabilised and connected to the opposite wall at the top with this straight, 160 cm long and shortenable mounting arm. Installation is possible in addition to or as an alternative to the towel rail. Delivery includes all screws, Fischer UX plugs and installation instructions in four languages (D, GB, I, FR), as well as a chrome-plated blind cap for optional sealing of the glass hole if the towel rail is not installed.

A fixed shower wall can be connected to the bathroom ceiling and stabilised with this straight, 75 cm high and shortenable mounting arm. Installation is possible in addition to or as an alternative to the towel rail. Supplied with all screws, Fischer UX plugs and installation instructions in four languages (D, GB, I, FR), as well as a chrome-plated blind cap for optional sealing of the glass hole if the towel rail is not fitted.

A fixed shower wall can be stabilised and connected to the wall with this diagonal fixing arm at the top corner. Installation is possible in addition to or as an alternative to the towel rail. Supplied with all screws, Fischer UX plugs and installation instructions in four languages (D, GB, I, FR), as well as a chrome-plated blind cap for optional sealing of the glass hole if the towel rail is not installed.

A shower fixed wall can be stabilised and connected to the wall with this diagonal fixing arm across the top corner. The (shortenable) length of 60 cm provides more stability for wide fixed walls and the arm can also be used for wall recesses within the shower. Installation is possible in addition to or as an alternative to the towel rail. Delivery includes all screws, Fischer UX plugs and installation instructions in four languages (D, GB, I, FR), as well as a chrome-plated blind cap for optional sealing of the glass hole if the towel rail is not installed.