Pump system Plancofix Line Jung pumps JP50177

Plancofix Line is a floor drain with integrated waste water pump. The system is installed directly in the screed and either completely or partially tiled. This means that the installation of a level-access shower can also be realised without an existing floor slope.

The Plancofix Line saves 3 cm installation depth compared to the standard Plancofix and is therefore ideal if you want to install a walk-in shower but the floor installation height is limited. The saving is made possible by a Syncromotor, which has smaller dimensions without you having to compromise on pump performance.

Thanks to the optional insulating tray, the Plancofix Plus also works extremely quietly and is barely audible with a noise level of around 30 dB(A).

Plancofix Line is supplied with an associated drainage channel. The 120 cm long shower channel can be individually shortened and customised to your needs. Your advantage: the floor slope only has to lead in one direction to the drainage channel. This saves on tile cuts and makes installation much easier.

Your advantages

• Modern bathroom design thanks to linear drainage
• Installation depth of just 9 cm
• channel can be shortened individually
• Optimum sound compensation thanks to insulating tray < 30 dB(A)
• Easy cleaning / maintenance
• Optional secondary drainage
• Pressure pipe 1"
• Hmax = 1.3 m
• Qmax = 25 l/min.

Installation

Unlike a lifting unit for a shower in accordance with DIN EN 12050-2, the Plancofix is installed directly as a floor drain (max. 20 l/min). This requires an installation depth of just 10.5 cm. The inlet can either be from above or via a horizontal connection piece (1″). In this way, the pump can be ideally adapted to the prevailing installation situation. You can position the Plancofix in the centre or at the edge of your shower enclosure, giving you complete freedom of design.

Plancofix pumps are made to order and therefore cannot be returned.