Saxo fast-setting tile adhesive
Product number:
SAX15972
Customer-specific customization
Description
Properties of SaxoSchnell tile adhesive:
- Can be walked on: after approx. 3 hours
- Layer thickness: up to 10 mm
- Consumption: approx. 2.0 kg/m² (6-part toothing)
- Open time: approx. 30 minutes
- 3 in 1: thin, medium and tile bed
- flexibilised
- Highly stable
- fast setting
- waterproof
- frost-resistant
- easy to apply
- smooth, easy to remove
- GISCODE: ZP1, low chromate
- DGNB: Quality level 4
Areas of application for SaxoSchnell tile adhesive:
- Interior and exterior
- Wall and floor
- underfloor heating
- Construction sites with tight deadlines that need to be grouted on the same day
- g
Substrate and preparation:
The substrate should be solid, load-bearing and free of cracks. Low-strength and/or non-load-bearing surface layers, extremely dense and/or smooth substrates, cement slurries, separating layers (e.g. dirt, dust, grease, oil, paint residues, etc.) must be removed and/or roughened (e.g. Blastrac method). When laying with concrete blocks, ceramic tiles and slabs using the thin-bed method, the substrate must not exceed a maximum moisture content.
A primer coat is recommended. We recommend Saxoboard primer for this purpose. If in doubt, create test areas, ask Saxoboard for advice if necessary.
Scope of Delivery
- Bag goods 25 kg flexible adhesive
Available downloads
