SaxoLevel levelling compound Levelling compound

Properties of SaxoLevel levelling compound:

• Layer thickness: 0-10 mm in one work step
• Can be walked on: after approx. 3 hours
• Can be covered: after approx. 6 - 24 hours
• Consumption: approx. 1.6 kg/m² (per mm layer thickness)
• Working time: approx. 30 minutes
• Easy to apply
• low tension
• suitable for chair castors according to DIN EN 12529
• Very good levelling properties
• Fast drying, high yield
• plastic-modified, pumpable
• GISCODE: ZP1, low chromate
• EMICODE according to GEV: EC1PLUS
• DGNB: Quality level 4
• 10-YEAR SYSTEM GUARANTEE

Areas of application for SaxoLevel levelling compound:

• Interior
• floor
• Underfloor heating
• Embedding of water-based thin-layer heating systems
• Embedding of Oase underfloor heating systems
• Can be covered with ceramic tiles and slabs, natural stone coverings, PVC coverings, carpets, parquet (layer thickness min. 3 mm)

Substrate and preparation:

The substrate should be firm, load-bearing and free of cracks. Low-strength and/or non-load-bearing surface layers, extremely dense and/or smooth substrates, cement slurries, separating layers (e.g. dirt, dust, grease, oil, paint residues, etc.) must be removed and/or roughened (e.g. Blastrac method). When laying with concrete blocks, ceramic tiles and slabs using the thin-bed method, the substrate must not exceed a maximum moisture content.

A primer coat is recommended. We recommend Saxoboard primer for this purpose. If in doubt, create test areas, ask Saxoboard for advice if necessary.