Shower tray for wall drain, decorative surface

Product number: SAX16441

Description

This level-access shower tray with decorative surface is perfect for installation in walk-in showers.

The surface made of high-quality, very durable 2 mm thick HPL compact laminate is elegant and available in several decorative colours. HPL stands for High Pressure Laminate, which is not only water-resistant but also scratch-resistant.

HPL decorative shower trays

Elegant surface in the decor and colour of your choice
PET as substrate material 150 kg/m³
Seamless joints possible, hygienic and non-porous
Particularly durable and colour-fast
Very stable and wheelchair-accessible
Acid-resistant, scratch- and impact-resistant
Customised designs possible in a short time

The shower tray is based on waterproof PET rigid foam, which is extremely pressure-resistant at 150 kg/m³, to which a continuous HPL compact laminate panel is applied. The important drainage slope is already integrated into the shower tray. This shape enables an elegant and barrier-free shower with a high-quality finish and uncompromising design.

Drain and installation height

The shallow shower tray with point drain benefits from a minimal overall installation depth. The drain and sealing insert are already pre-assembled. The sealing and decoupling membrane are also integrated ex works.

Overall installation depths

The total installation depth is made up of the thickness of the shower tray and the height of the drain.

Total installation depth & drain direction	Shower tray thickness	Drain
4.0 cm	4.0 cm (3.7 cm PET base + 0.3 cm HPL compact laminate)	Wall drain not included
3.0 cm	3.0 cm (2.7 cm PET base + 0.3 cm HPL compact laminate)	Wall drain not included

The HPL compact lamin ate surface is also suitable for use with above-average point loads (e.g. use of a shower chair or wheelchair).

Freedom when installing the shower and the drain position

The position of the wall drain within the shower is freely selectable. If you wish, you can position the wall drain not only in the centre, but also at the edge. To do this, select the decentralised drain position option.

100% tightness at the edge

To ensure absolute impermeability, the shower tray has an applied sealing fleece with a 7 cm "fleece overhang" all round.

The overhang is simply glued to the wall and the neighbouring floor. This achieves 100 per cent impermeability around the edges.

Installation instructions

The installation video refers to a tileable shower element. Installation is identical for the floor-level shower tray. However, tiling is not required as a finished HPL surface is already present.

SaxoPET Eco

SaxoPET Eco is the world's first sustainable substrate material for showers, which consists of 100% recycled PET and at the same time has maximum compressive strength (compressive strength 110 tonnes/m²).

Fully integrated electric or hot water underfloor heating (optional)

On request, a fully integrated electric underfloor heating system can be installed at the factory. Only the connection cables then protrude from the shower tray, which only need to be connected to the existing power supply. If you would like a hot water heating system for our shower trays, please send us your existing underfloor heating pipe. We will then integrate this completely into the shower tray. The connections for this look out at the points you specify (these are configured at the top). The heating integrated into the shower element does not increase the installation height/thickness of the shower element.

You will receive a thermostat for convenient regulation of the floor temperature with the electric floor heating.

Unfortunately, it is not possible to return these shower elements as they are customised to your order.