Shower waste pumps & drain pumps

The lifting unit for showers (shower waste water pump) is always used when the necessary gradient to drain the service water is missing.

Pump system Plancofix Jung Pumpen JP44685 Installation depth 10.5 cm

Installation depth 10.5 cm
For showers up to 20 l/min
Pressure line 1"
Drain can be tiled or made of stainless steel
Delivery head up to 2.30 meters

Product details & configuration From 1.139,19 €*

Plancofix Connect floor drain pump

Compact and small: With a height of just 7.5 cm, the Plancofix Connect is the flattest of the Jung-Pumpen floor drainage pumps, ideal for old buildings with low floor construction heights. The height-adjustable feet enable precise and horizontal installation in the trough. The required opening is only 25 cm wide and 50 cm deep.
Synchronous motor: The built-in synchronous motor permanently changes the direction of rotation, prevents long hair from getting tangled in the impeller and ensures that it is reliably removed by the hydraulics.
Quiet operating noise: At just 27 dB (A) during shower operation, the Plancofix Connect is particularly quiet and therefore also suitable for apartment blocks.
Standard-compliant: Load class 3 means that the shower can be accessed with a wheelchair. The sealing fleece fulfils the requirements of DIN 18534 for water exposure class W 3-1 and crack class R 3-1, providing reliable protection against leaks.
Further plus points:
VDE approval
Level control via float
Easy to clean thanks to good accessibility
Rubber feet and foam tray for noise reduction

Product details & configuration From 1.283,27 €*

Pump system Plancofix Line Jung pumps JP50177 Installation depth 9 cm

Installation depth 9 cm
For showers up to 20 l/min
Pressure line 1"
Drain can be tiled, channel can be shortened individually
120 cm channel width
Delivery head up to 1.30 meters

Product details & configuration From 1.430,62 €*

Pump system Plancofix Plus Jung Pumpen JP47014 Installation depth 8 cm

Installation depth 8 cm (9 cm with insulation tray)
Optimal sound compensation thanks to insulation tray <30 dB(A)
For showers up to 25 l/min
Pressure line 1"
Drain can be tiled or made of stainless steel
Delivery head up to 1.30 m

Product details & configuration From 1.139,19 €*

Waste water pumps as a lifting system for the shower

The installation of a level-access shower is often part of a bathroom renovation. This is not only modern, but also barrier-free. However, especially in old buildings or in basements and cellars, there is often a lack of the necessary free fall for such a construction project, meaning that a lifting system must be used for the water.

Small lifting unit from Plancofix

If the floor is too low, the water cannot drain away by itself - the bathroom would fill up. Plancofix pumps for showers put an end to this problem. The waste water pump automatically and barely audibly pumps the used water into the designated waste water pipe.

Plancofix design options:

Completely tiled
Completely or partially as a stainless steel drain
with drainage channel

Low-maintenance and easy-to-clean lifting unit for the shower

The pump system for the shower can be cleaned from above just like a conventional drain. The two stainless steel components can be removed at any time, making it very easy to remove deposits from the housing. A quick shower with the shower head and/or wiping with a sponge is often sufficient.

The hydraulics can be taken apart without tools and cleaned individually. It is only important that the shower pump is temporarily de-energised.

Cleaning the pump in 5 steps

Remove the cover
Remove deposits from stainless steel plates and housing
Pump out excess water
De-energise the pump
Clean the float switch and hydraulic components individually