Snail shower
Description
The snail shower as a pre-moulded, tileable shower screen. The shower wall is available either unfinished or already filled with glass fibre fabric. Prior filling with glass fibre fabric is required for tiling.
The Saxoboard shower screen is made of extremely dimensionally stable EPS rigid foam and is customised to your requirements. You will receive assembly adhesive with the delivery, which you can use to professionally bond the wall elements and the floor element.
If there are several walls, the individual shower wall sections are fitted with tongue and groove. These are simply plugged together.
The matching shower element is included in the scope of delivery. It has a central drain in the centre and the drain direction can be selected horizontally or vertically, with different installation heights.
The wall of the tileable snail shower has a circumference of 372 cm. When calculating the quantity of wall tiles for an example height of 200 cm, the following calculation must be made: 3.72 m (circumference) x 2.00 m (height) = 7.44 m² tiles (outside) without waste. Inside it is then slightly the same.
This product is a customised special design that cannot be exchanged or returned. If you have any questions, please do not hesitate to contact us.
Scope of Delivery
- Shower wall according to your configuration
- Including matching shower element
- Sufficient connection angles for wall and floor
- Mounting adhesive
Installation Depth
For horizontal outlet: 6,6 - 12,0 cm
For vertical outlet: 1,8 - 4,0 cm
Available downloads
