Deep shower tray with square drain semi-circular, solid surface
Description
This deep shower tray is perfect for installation in walk-in showers. It can be installed both flush with the floor and standing on the floor.
Optional bevelling
The "bevelled edge" option is recommended for floor-standing installation. In this case, a side panel made of solid surface material is attached to the shower tray. This gives the protruding tray a uniform overall appearance. Alternatively, the sides can be tiled or otherwise panelled.
Scope of Delivery
- Saxoboard® floor element
- 1 drain with odor trap
- 1 drain grate including plastic frame
- 1 installation instructions
Installation Depth
For horizontal outlet: 10,8 - 13,7 cm
For vertical outlet: 6,0 cm
Surface
The surface made of high-quality mineral material is attractive and available in homogeneous white (RAL 9016), gray (RAL 7035) or black (RAL 8022) as well as other colors.
Mineral material shower trays
- attractive, homogeneous surface
- seamless connections possible, hygienic and non-porous
- particularly durable and colorfast
- very stable and wheelchair accessible
- acid-resistant, scratch- and impact-resistant
- Custom-made products available in a short time
As the basis for the The shower tray is made of waterproof expanded polystyrene (EPS rigid foam), with a continuous mineral surface applied to it. The important drain gradient is already integrated into the shower tray. This shape enables an elegant and barrier-free shower with the highest quality and uncompromising design.
Drain and Installation Height
The deep shower tray with point drain benefits from a minimal overall installation depth. The drain and sealing insert are already pre-assembled. The sealing and decoupling membranes are also integrated at the factory.
Total installation depths
The total installation depth is made up of the thickness of the shower tray and the height of the drain.
| Total installation depth & Drain direction | Shower tray thickness | Drain |
| 13.7 cm horizontal | 6.0 cm (5.0 cm EPS base + 1.0 cm solid surface) | 7.7 cm horizontal |
| 10.8 cm horizontal | 6.0 cm (5.0 cm EPS base + 1.0 cm solid surface) | 4.8 cm horizontal |
| 6.0 cm vertical | 6.0 cm (5.0 cm EPS base + 1.0 cm mineral material) | no depth vertical (drain can be sunk directly into the floor) |
The solid surface is suitable for applications with above-average point loads (e.g., use of a shower chair or wheelchair).
Freedom when installing the shower and the drain position
The drain system included with the shower tray offers all options for installation and positioning. It can be installed horizontally or vertically. With horizontal installation, the drain can be rotated 360° and can therefore be directed in any direction. With vertical installation, the drain is sunk directly into the floor.
The position of the point drain within the shower is freely selectable. If you like, you can place the point drain not only in the center but also at the edge. To do this, select the decentralized drain position option.
An easy-to-clean siphon with a removable odor trap is included.
The shower tray has a drain with a standardized DN50 connection. The connection can be easily expanded for any of our shower trays.
Drain Design
We supply a stainless steel grate with curved lines for the point drain with the shower tray. If you prefer a more extravagant solution, you can choose from other high-quality designer grates for an additional charge.
100% Watertight Edges
For absolute watertightness, the shower tray has an applied sealing fleece with a 7 cm "fleece overhang" all around.
The overhang is simply glued to the wall and the adjacent floor. This ensures 100% watertightness around the edges.
Installation Instructions
The installation video refers to a tileable shower element. The installation is identical for the floor-level shower tray. However, tiling is not required, as a finished white surface made of solid surface material is already present.
Fully integrated electric or hot water underfloor heating (optional)
A fully integrated electric underfloor heating system can be installed at the factory upon request. Only the connecting cables protrude from the shower tray, which only need to be connected to the existing power supply. If you would like hot water heating with our shower trays, please send us your existing underfloor heating pipes. We will then fully integrate them into the shower tray. The connections protrude at the locations you specify (these are configured above). The heater integrated into the shower element does not increase the installation height/thickness of the shower element.
The electric floor heating comes with a thermostat for convenient floor temperature regulation.
Unfortunately, these shower elements cannot be returned, as they are custom-made for you after your order.
Available downloads
