Shower tray for wall drain made of solid surface material

Product number: SAX15245.1

Description

This level-access shower tray is perfect for installation in walk-in showers.

The surface made of high-quality solid surface material is elegant and available in homogeneous white (RAL 9016) , grey (RAL 7035) or black (RAL 8022) as well as other colours.

Solid surface shower trays

Attractive, homogeneous surface
Seamless connections possible, hygienic and non-porous
Particularly durable and colour-fast
Very stable and wheelchair-accessible
Acid-resistant, scratch and impact-resistant
Customised designs possible in a short time

Water-impermeable expanded polystyrene (EPS rigid foam) serves as the basis for the shower tray, to which a continuous solid surface is applied. The important drainage slope is already integrated into the shower tray. This shape enables an elegant and barrier-free shower with a high-quality finish and uncompromising design.

Drain and installation height

The shallow shower tray with point drain benefits from a minimal overall installation depth. The drain and sealing insert are already pre-assembled. The sealing and decoupling membrane are also integrated ex works.

Overall installation depths

The total installation depth is made up of the thickness of the shower tray and the height of the drain.

Total installation depth & drain direction	Shower tray thickness	Drain
4.0 cm	4.0 cm (3.0 cm EPS base + 1.0 cm solid surface material)	Wall drain not included
3.0 cm	3.0 cm (2.0 cm EPS base + 1.0 cm solid surface material)	Wall drain not included

The solid surface is also suitable for use with above-average point loads (e.g. use of a shower chair or wheelchair).

Freedom when installing the shower and the drain position

The position of the wall drain within the shower is freely selectable. If you wish, you can position the wall drain not only in the centre, but also at the edge. To do this, select the decentralised drain position option.

100% tightness at the edge

To ensure absolute impermeability, the shower tray has an applied sealing fleece with a 7 cm "fleece overhang" all round.

The overhang is simply glued to the wall and the neighbouring floor. This achieves 100 per cent impermeability around the edges.

Installation instructions

The installation video refers to a tileable shower element. Installation is identical for the floor-level shower tray. However, tiling is not required as there is already a finished white surface made of solid surface material.

SaxoPET Eco

You have a choice of three different substrate materials. All are highly pressure-resistant. SaxoPET Eco is the world's first sustainable substrate material for showers that is made from 100% recycled PET and is also highly pressure-resistant (compressive strength 110 tonnes/m²).

Fully integrated electric or hot water underfloor heating (optional)

On request, a fully integrated electric underfloor heating system can be installed at the factory. Only the connection cables then protrude from the shower tray, which only need to be connected to the existing power supply. If you would like a hot water heating system for our shower trays, please send us your existing underfloor heating pipe. We will then integrate this completely into the shower tray. The connections for this look out at the points you specify (these are configured at the top). The heating integrated into the shower element does not increase the installation height/thickness of the shower element.

You will receive a thermostat for convenient regulation of the floor temperature with the electric floor heating.

Unfortunately, it is not possible to return these shower elements as they are customised to your order.