Wet room shower tray with corner drain
Description
Please note: The position of the drain should always be seen as if you were standing in front of the short side.
Your advantages at a glance
- 100% watertight at the factory + ready to install
- Slope already integrated
- incl. Dallmer drain + stainless steel grate
- Directly from the manufacturer
- Barrier-free installation
The classic among the Saxoboard® floor elements. This floor-level tileable shower element is ideal for the installation of level-access showers. The board is made of waterproof, expanded polystyrene, a rigid foam that can withstand the weight of a wheelchair. The necessary drainage slope is already integrated. Barrier-free showering at the highest level.
Drain and installation height
The overall installation height of the level-access Saxoboard® shower element with corner drain is always measured from the top edge of the shower element at its thickest point to the bottom edge of the horizontal pipe when the drain is horizontal. For vertical outlets, it is assumed that the drain can be sunk directly into the floor. The sealing insert and drain are already installed, just as the sealing and decoupling membrane or mineral coating (for higher point loads) have already been applied in the Saxoboard® factory. The drainage system can be installed horizontally or vertically, whereby the horizontal drain can be turned in any direction during installation. The position of the point drain is in the corner, approx. 1.5 cm from the edge.
Overall installation depths
The total installation depth is made up of the thickness of the shower element and the height of the drain.
| Overall installation depth & drain direction | Shower element thickness | Drain |
| 12.0 cm horizontal | 4.0 cm Shower element | 8.0 cm horizontal (0.72 litres/second with 50 mm sealing water height) |
| 7.8 cm horizontal | 3.0 cm Shower element | 4.8 cm horizontal (0.4 litres/second with 20 mm sealing water height) |
| 6.6 cm horizontal | 1.8 cm shower element | 4.8 cm horizontal (0.4 litres/second with 20 mm sealing water height) |
| 4.0 cm vertical | 4.0 cm Shower element | no depth vertical (1.12 litres/second with 50 mm sealing water height. Drain can be sunk directly into the floor) |
| 3.0 cm vertical | 3.0 cm shower element | no depth vertical (1.12 litres/second with 50 mm sealing water height. Drain can be sunk directly into the floor) |
| 1.8 cm vertical | 1.8 cm shower element | no depth vertical (1.12 litres/second with 50 mm sealing water height. Drain can be sunk directly into the floor) |
100% tightness in the edge area
With this option, we leave a 7 cm overhang around the edge of the shower element with the sealing fleece applied. This overhang is simply glued up the wall and over the neighbouring floor. This allows you to achieve 100% impermeability in the edge area, because the shower element acts like a closed tray!
- Sound insulation certificate in accordance with DIN 4109
- System tested in accordance with DIN 18534-5
(all components of the system tested)
Drain design
We supply a stainless steel grate for the point drain with the shower element. If you would like a more extravagant solution, you can choose from other high-quality designer gratings for an additional charge. The grate is infinitely height-adjustable from 0.6 cm to 3.5 cm for different tile thicknesses. The drain design is optionally tileable for tile thicknesses up to 1 cm.
SaxoPET Eco
You have a choice of three different backing materials. All are highly pressure-resistant. SaxoPET Eco is the world's first sustainable substrate material for showers that is made from 100% recycled PET and is also highly pressure-resistant (pressure resistance 110 tonnes/m²).
Fully integrated electric or hot water underfloor heating (optional)
No more standing with your feet on a cold shower floor in the morning. That's the promise of our elements with fully integrated electric underfloor heating, which can be installed at the factory on request. Only the connection cables then protrude from the shower element, which only need to be connected to the existing power supply. If you would like hot water heating for our shower elements, please send us your existing underfloor heating pipe. We will then integrate this completely into the shower element. The connections for this look out at the points you specify (these are configured above). The heating integrated into the shower element does not increase the installation height/thickness of the shower element.
Scope of Delivery
- 1 Saxoboard® floor element
- 1 Dallmer drain with odor trap
- 1 stainless steel grate including plastic frame
- 1 installation instructions
Installation Depth
For horizontal outlet: 6,6 cm - 12,0 cm
For vertical outlet: 1,8 - 4,0 cm
Video
Available downloads
