Wet room shower tray with linear drain Slimline superflat

Product number: SAX12833

Configure your shower element

Wheelchair accessible

Barrier-free installation

Sound insulation DIN ISO/IEC 17025

Tested by building authorities

Description

This tileable board from our Slimline range has a channel as a drainage solution and is characterised by its very flat overall installation height of just 80 mm with a horizontal (side) outlet . With a vertical outlet (straight down), the shower element has an installation height of just 3.7 cm. In order to do justice to the flat appearance of the flush-to-floor shower element, the stainless steel channel was also designed to be slim. The shower channel is already installed and is height-adjustable for tile thicknesses of 8-20 mm. If you require a lower upstand height, please make a note of this in your order. The shower channel has a removable odour trap with hair sieve.
The drain can be rotated through 360° in any direction.

Your advantages at a glance

100% watertight at the factory + ready to install
Drain can be rotated 360° in any direction
Second drainage level
Height-adjustable channel (for different tile thicknesses)
gradient already integrated
incl. drain + stainless steel grating
Directly from the manufacturer
Barrier-free installation

The ground-level Saxoboard® Slimline shower element with channel is also suitable for the installation of floor-level showers of the highest standard. The Slimline shower element can also be used as a pedestal variant. The waterproof shower base element is made of expanded polystyrene hard foam and has a factory-applied sealing and decoupling membrane or a mineral coating for even higher point loads. The floor element can be individually tiled. Like all Saxoboard® shower elements, this Slimeline Board with channel also has an integrated slope for perfect water drainage. The Saxoboard® Slimline shower element with channel enables barrier-free showering. The board is suitable for wheelchair access.
Water barrier height 35 mm.

100% impermeability at the edge

With this option, we leave a 7 cm overhang around the edge of the shower element with the sealing fleece applied. This overhang is simply glued up the wall and over the neighbouring floor. This allows you to achieve 100% impermeability in the edge area, because the shower element acts like a closed tray!

Sound insulation certificate in accordance with DIN 4109
System tested in accordance with DIN 18534-5
(all components of the system tested)

SaxoPET Eco

You have a choice of three different substrate materials. All are highly pressure-resistant. SaxoPET Eco is the world's first sustainable substrate material for showers that is made from 100% recycled PET and at the same time has maximum compressive strength (compressive strength 110 tonnes/m²).

Fully integrated electric or hot water underfloor heating (optional)

No more standing with your feet on a cold shower floor in the morning. That's the promise of our elements with fully integrated electric underfloor heating, which can be installed at the factory on request. Only the connection cables then protrude from the shower element, which only need to be connected to the existing power supply. If you would like hot water heating for our shower elements, please send us your existing underfloor heating pipe. We will then integrate this completely into the shower element. The connections for this look out at the points you specify (these are configured above). The heating integrated into the shower element does not increase the installation height/thickness of the shower element.

Due to the special manufacturing technology, Slimline shower elements are customised products and therefore cannot be exchanged or returned. Your guarantee remains unaffected.