Wet room shower tray with linear drain Solid
Description
This tileable board from our Solid range has a channel as a drainage solution and is characterised by its very flat overall installation height of just 65 mm with a horizontal (side) outlet . In order to do justice to the flat appearance of the flush-to-floor shower element, the stainless steel channel has also been designed to be slim. The channel is already installed and has a height-adjustable channel for tile thicknesses of 8-20 mm. If you require a lower upstand height, please make a note of this in your order. The shower channel has a removable odour trap with hair strainer.
Your advantages at a glance
- 100% watertight at the factory + ready to install
- Second drainage level
- Height-adjustable channel (for different tile thicknesses)
- gradient already integrated
- incl. drain + stainless steel grating
- Directly from the manufacturer
- Barrier-free installation
The level-access Saxoboard® Solid shower element with channel is also suitable for the installation of floor-level showers of the highest standard. The Solid shower element can also be used as a pedestal variant. The waterproof shower base element is made of expanded polystyrene rigid foam and has a factory-applied waterproofing and decoupling membrane or a mineral coating for even higher point loads. The floor element can be individually tiled. Like all Saxoboard® shower elements, this Solid Board with channel also has an integrated slope for perfect water drainage. The Saxoboard® Solid shower element with channel enables barrier-free showering. The board is suitable for wheelchair access.
Water barrier height 35 mm.
100% impermeability at the edge
With this option, we leave a 7 cm overhang around the edge of the shower element with the sealing fleece applied. This overhang is simply glued up the wall and over the neighbouring floor. This allows you to achieve 100% impermeability in the edge area, because the shower element acts like a closed tray!
- Sound insulation certificate in accordance with DIN 4109
- System tested in accordance with DIN 18534-5
(all components of the system tested)
SaxoPET Eco
You have a choice of three different substrate materials. All are highly pressure-resistant. SaxoPET Eco is the world's first sustainable substrate material for showers that is made from 100% recycled PET and at the same time has maximum compressive strength (compressive strength 110 tonnes/m²).
Fully integrated electric or hot water underfloor heating (optional)
No more standing with your feet on a cold shower floor in the morning. That's the promise of our elements with fully integrated electric underfloor heating, which can be installed at the factory on request. Only the connection cables then protrude from the shower element, which only need to be connected to the existing power supply. If you would like hot water heating for our shower elements, please send us your existing underfloor heating pipe. We will then integrate this completely into the shower element. The connections for this look out at the points you specify (these are configured above). The heating integrated into the shower element does not increase the installation height/thickness of the shower element.
Scope of Delivery
- 1 Saxoboard® floor element with channel and upper part (of your choice)
- Horizontal odor trap (DN40)
- 1 channel design of your choice
- 1 installation instructions
Installation Depth
For horizontal outlet: 6,5 cm
For vertical outlet: 6,5 cm
Video
Available downloads
